Best Wooden Sheds » shelf standards http://bestwoodensheds.com The most practical and comprehensive site for wooden sheds and garden sheds on the web. Sat, 21 Aug 2010 19:36:29 +0000 en hourly 1 Making the Best Out Of The Small Spaces In Your Wooden Shed http://bestwoodensheds.com/making-the-best-out-of-the-small-spaces-in-your-wooden-shed/ http://bestwoodensheds.com/making-the-best-out-of-the-small-spaces-in-your-wooden-shed/#comments Sat, 01 Aug 2009 04:50:40 +0000 Shelley W. http://bestwoodensheds.com/?p=150 For your backyard storage wooden shed, here’s a simple and very inexpensive storage solution. Use shelves to fill in all those small spaces between the studs. Of course, most people put shelving up in their sheds, but they attach them to the fronts of the studs which leaves a gap between the exterior siding and the back edge of the shelf. Here’s a quick look at how to make the shelving (and the best part, its adjustable):








wooden sheds shelf installation

First, you have to take down any existing shelving. This will give you not only the room to work, but it also makes the project go a lot quicker. You will be taking this down temporarily so don’t throw anything away that you think you will be able to use again. In between any two studs, you will attach lengths of what are called shelf standards. These are strips of rolled metal, usually available in zinc, brass or metal coated with different colored epoxy. They have horizontal slots cut out every half inch to accept clips that hold the shelves.

For a cleaner look, route out grooves for the tracks if you wish to have them flush with the surface of the studs. Otherwise, surface mount them by simply screwing them into studs. Install two separate tracks up the sides of each stud. Put them in about three to three and a half inches apart for added stability. To make sure your shelves will be level, the slots on each side should be the same distance from the floor.

Insert support clips (four for each shelf) into the slots in the tracks at the desired height for the shelf. Now, measure from one stud to the other the distance between the tracks. Taking a piece of 1×4, cut to length for the shelves using the measurement you made between the studs. Because the 1×4 is the same width as the 3×4 stud, there’s no need to rip down any of the shelves.

You can now reattach the existing shelves back to their original locations. Add as many small shelves as you want. They are the perfect place for all your small items you have laying around the shed.

Return to Home Page

Share and Enjoy:
  • StumbleUpon
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Twitter
]]> http://bestwoodensheds.com/making-the-best-out-of-the-small-spaces-in-your-wooden-shed/feed/ 0